Headstock cone comes with variety of formats. Depending on the user’s requirement, special custom-designed headstocks or gate opening mechanisms can also be manufactured that including electric actuated, pneumatic / hydraulic actuated, manual geared and direct manual with / without indicator.

Stem Guides

Stem guides are provided as required to support the stem from buckling. The stem guides are designed as per AWWA/BS7775 Standards. Stem guide brackets are fabricated from 304 stainless steel (316 optional). The stem guide collar is fabricated from 304 stainless steel (316 optional) with an ultra high molecular weight polyethylene (UHMWPE) (bronze optional) bushing.

Headstock Wall Bracket

Headstock wall brackets are used to support headstock or extension spindle. When no concrete structure or suitable floor exists in the operating area. Manufactured in cast iron / mild steel / stainless steel, the brackets are designed to withstand all normal operating loads.

Muff Coupler

Manufactured in SUS304 / SUS316 / cast iron for joining straight lengths of spindle in-line. For use with axial and torsion loads (rising and non-rising spindle application)

Two type of coupling are available :-

  1. Plain muff coupling
  2. Screwed muff coupling

The use of a particular type of coupling will depend upon the operating duty and/or the specification.

The products specified in this website are subjected to continuous development and improvement and are subject to alterations without prior notice.
error: Content is protected !!